 Crown Timber is the leading supplier of planed strength graded softwood to the roof truss manufacturing and timber frame construction markets in the UK and Ireland.
Roof Truss Timber
All truss timber, primarily TR26 grade softwood, is supplied in accordance with BSEN519.
To ensure customers achieve optimum efficiency, Crown operates on quarterly contracts to deliver a specific volume of timber over the fixed period. The specification for each delivery is confirmed by the customer just 48 hours before it is required providing maximum flexibility for the manufacturer customer.
CLS Profiles
Crown Timber's CLS product is a factory produced timber component ideally suited to the needs of modern construction. The softwood is kiln-dried, strength-graded and planed all round to give four rounded corners for ease of handling. As with all Crown Timber products it is wane free, packaged to length with standard pack sizes and wrapped.
Because of its consistency and reliability Crown's CLS profile timber is ideally suited for use as timber studding. For the same reasons it is widely used by timber frame manufacturers.
For the builder and merchant it is available in the 2 dimensions and 2 lengths of most frequent interest:
- 50 x 75mm (fin 38 x 63mm) 2.4m and 4.8m
- 50 x 100mm (fin 38 x 89mm) 2.4m and 4.8m
Crown's CLS profile offers the following benefits:
 The right size (door linings always fit and the range can be kept to a minimum)
The right length (no waste for you or your customer)
Ready to use "off the shelf" requiring no further processing
For the timber frame manufacturer, Crown Timber can also P.E.T (precision end trim) either in the UK or at source. This service can also be applied to stud or joist material. |
